115V Adblue Pump For Urea Solution

continuous duty,self-priming Power: Electric Application: adblue urea Diesel,Oil, Fuel Adblue Pump For Urea Transfer 

SPECIFICATION

PUMP Design:   5 chamber diaphragm

Motor Design:   Permanent magnet DC/AC

Voltages:       12, 24VDC,115/230VAC

    

Pump Body:     Aluminium

Diaphragm: Viton

Check valves: Viton

Max. Flow Rate:   30~50LPM

Max. Pressure:   40PSI (2.75BAR)

Liquid Temp:     40°F (5°C)MIN;  

140°F (60°C)MAX

Duty cycle:     Continuous work with self-ventilated

Weight:        5.5KG for DC pump  6.5KG for AC pump

Certifications: CE

Port Size inlet/ outlet: 3/4”  1

Application: Ideal for unloading from Chemical liquid transfer,Totes or Drums of adblue, Diesel Exhaust Fluid, Detergents, Soaps, Acids and Alkalis. Technical Data:     Permanent magnet and continuous dutyBuilt-in pressure switch automatically starts and stopsPump when faucets is opened Self-priming 3m so pump can be located above water tank Runs dry for extended periods of time without damageHold excellent motor keep stable temperature of pump bodyCE certificate

 DC MOUNTING

  

The HV Series pumps are self-priming and may be located above or below the water supply in a dry location. To vertically mount these units, it is best to do so with the motor on top. This will prevent water dripping on the motor in the event of a leak. Place pump on a solid surface and secure with four mounting screws; be careful not to compress the rubber grommets, which act as vibration dampers.

AC assembled